Raimondi Rai-Fix safety Withholding Hooks 5mm
$170.00

Raimondi Rai-Fix safety withholding hooks 5mm

Mechanical support system for minimum 1/4″ thick tile/slab – 3/16″ Wing Size

The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 1/4″ (6mm)

It is the perfect solution because it is completely invisible once the facade is installs.

When installing tiles/slabs bigger that 12??? (being them in ceramic, porcelain or natural stone) in fa??ade with adhesive, it is required to use a mechanical safety system which prevents the tile / slab to fall down in the event of detachment of the adhesive.*

Indeed adhesives guarantee perfect anchorage of the tile/slab only if perfectly applied. But this is not always the case.

In addition to that, it is hard to predict the strains the tile/slab will have to bear because of building???s settlement as well as expansion for temperature range, extreme weather conditions, earthquake and so on???

Therefore, the safety withholding hook RAI-FIX is a crucial ally of the architect/designer (and of course of the buyer) to assure the maximum safety. In addition to that RAI-FIX expands the design possibilities since tiles and slabs of any size can be now used.

Aesthetically speaking, RAI-FIX is the perfect solution since it is completely invisible once the fa??ade is done. In fact RAI-FIX has to be placed between the tile / slab and the wall and therefore it is 100% hidden.

The safety withholding hook RAI-FIX is made of stainless steel and can be used with tiles / slabs of minimum thickness 6 mm (0.24 inches).

The installation is very simple and is carried out directly on the jobsite in a few seconds.

* Regulations may vary from Country to Country. Therefore, it is necessary to refer to the legislation in force in the area where the building /jobsite rises

  • Tensile strength laboratory tests gave the following result: 198 lbs.
  • With 10 holes ?? 5/16″ and one hole ?? 9 1/3″ for inserting the anchor screw.
  • Made in premium quality stainless steel.
  • With the RAI-FIX installation of large tiles and slabs on a vertical surface is very simple and carried out directly on the job site.
  • The safety withholding hook is a simple and effective device that prevents the tile of slab from falling down in the event of detachment.
  • The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 1/4″ (6mm)

Rai-Fix Mechanical Support System Specifications

Copyright © 2022 AMAST. All rights reserved.

Submit you post here.

Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!

Please complete the required fields.
Please select your image(s) to upload.

New Account

Please complete the details below and we'll be in contact as soon as possible.